how to create crystal chain earrings

parts needed – 6 swarovski crystals, 4 headpins, 2 eyepins, 1 pair earring hooks or studs with loop and 1/4 meter of chain

thread four of the crystals onto the headpins and two onto the two eyepins (eyepins have a loop at one end). with flat nose pliers bend all the pins to right angles

cut the pins with cutters at about 1 cm from the bend. place round nose pliers at the cut and bend the pin up and around (the opposite direction of the bend) to make a loop.

cut the chain into four strips, two longer equal lengths and two shorter (by about 1 cm) equal lengths. slightly reopen the loops on the four headpins with crystals and attach one length of each chain. close all loops again

slightly reopen the eyepins with crystals and attached to each one, one of the longer and one of the shorter chains (now with crystals attached). close loops

slightly open the other loop on the eyepin and attach the earring hook or stud. close loop

enjoy

if you would like to create this you can simply order the materials used at info@tigereyebeads.com (info null@null tigereyebeads NULL.com)